Moisture-Resistant Drywall and Backer Board in Nashville and Middle Tennessee
Tile, Floors and Walls

Moisture-Resistant Drywall and Backer Board

Moisture-resistant drywall and cement or foam backer board installed over studs, taped and finished correctly so the walls behind tile and paint stay dry, straight and sound.

Behind every bathroom tile is a board that does more work than most people know. The wrong board in a wet area can swell, soften and crumble. Homeowners in Nashville who open a wall during a remodel often find that moisture has already damaged the old drywall.

We open and inspect the framing, replace any wet or rotted wood and install the right board for each area: cement board or foam board in showers, moisture-resistant drywall in dry parts and standard drywall in the ceiling when ventilation is good. We tape and finish seams, set the board flat and straight and prepare the wall for waterproofing, tile or paint. We explain which materials work where, so you can understand your plan. Walls hide their problems until the tile is gone. When we open a bathroom, we check the studs, the insulation and the back of the old board for stains or soft spots. We show you what we find, and we repair it before new board goes up, so the new walls begin on solid ground.

Inspect the framing

We look for wet or damaged studs and repair them before covering the wall with new board.

Right board, right place

Cement board, foam board and moisture-resistant drywall each have a place, and we explain where they go.

Flat and secure

Boards are fastened to the framing and set flat, so tile and paint look right.

Tape and finish

Seams are taped and finished or sealed as the material requires, ready for waterproofing and tile.

What is included

  • Framing inspection
  • Wet wood repair
  • Board selection
  • Board installation
  • Taping and finishing
  • Preparation for tile
Before and after

See the transformation.

Drag the handle to compare.

After: a bathroom floor with fresh black and white patterned porcelain tile with clean groutBefore: a bathroom floor with cracked beige tile and dingy grout linesBeforeAfter
Cracked floor tile, then fresh patterned tile. From cracked beige tile and dingy grout lines to fresh black and white patterned porcelain tile with clean grout.
Why it works

What you get with Backer Board and Drywall

Framing repaired

Sound studs.

Right board

For each wall.

Flat walls

Good tile base.

Taped seams

Ready for finish.

Prepared for waterproofing

Planned layers.

Plain explanation

Materials explained.

Try it now

Bathroom Problem Finder: Leaks, Mold and Cracked Tile

Pick a concern, such as a leak, mold, cracked tile, a soft floor, a slow drain, a musty smell or a foggy room, to get likely causes, what to do first and the service page that fits.

How it works

Our process, start to finish.

  1. 01

    Call and share your goals

    You tell us what you want to change, who uses the bathroom and what bothers you now, and we ask about the home and your timing.

  2. 02

    Visit and measure the bathroom

    We look at the room, the plumbing access, the floor and walls, take measurements and photos and talk through ideas on site.

  3. 03

    Review the design and estimate

    You get a plain written estimate with the layout, fixtures, tile, finishes and schedule before anything is ordered.

  4. 04

    Demolish, repair and rough in

    We protect the home, remove the old bathroom, repair the floor and walls and set the plumbing and electrical rough-in.

  5. 05

    Waterproof, tile and install

    Showers are waterproofed and tiled, then the vanity, fixtures, glass, lighting and trim are installed and finished.

  6. 06

    Walk through and care

    We walk the finished bathroom with you, leave a care guide and photos and make it easy to schedule a checkup.

Questions

Backer Board and Drywall FAQ

Is green board waterproof?

No. It resists moisture but is not suitable inside showers. We use better products there.

Can drywall go in a shower?

No. Use cement board or a foam board with a membrane.

Why do bathroom walls get soft?

Moisture from leaks or poor ventilation. We find and fix the cause.

Do I need backer board on the ceiling?

Not always. Good ventilation and the right paint are important.

Can I tile directly on drywall?

In dry areas sometimes, but backer board is better. We advise.

Next step

Get your Free Estimate for Backer Board and Drywall.

Tell us about your bathroom and your idea and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your bathroom

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate