Faucets and Fixtures in Nashville and Middle Tennessee
Vanities, Counters and Storage

Faucets and Fixtures

Faucets and fixtures for sinks, showers and tubs in matching finishes, installed with new supply lines, valves and drains so every handle turns smoothly and nothing drips.

Faucets and fixtures are the jewelry of the bathroom, and the details matter. Mismatched finishes and worn handles make a fresh bathroom look unfinished. Homeowners in Nashville choose matching sets in chrome, brushed nickel, matte black or brass and let us install them properly.

We help you choose a finish and a style, check that holes and spacing match, and then replace faucets, shower trim, tub fillers and accessories. We install new supply lines and shutoffs where needed, check the valves and drains and test for leaks and for hot and cold flow. Careful plumbers make the small details count, such as aligning handles, tightening parts evenly and protecting finishes from scratches. Fixtures are touched many times a day, so feel matters. We encourage you to try handles, levers and spouts before you buy, since weight, reach and grip differ more than photos suggest. We also check that the finishes you like come in every piece you need, so the whole room matches.

Pick a finish

Chrome, brushed nickel, matte black and brass each have a look, and we help you keep them consistent.

Check fit

Hole spacing, spout reach and valve type must fit, so we check before ordering.

Install carefully

New supply lines, shutoffs and clean connections prevent drips and help the faucet last.

Test everything

We test hot and cold flow, handles and drains, and make sure nothing leaks.

What is included

  • Finish and style selection
  • Hole and spacing check
  • Fixture removal
  • New lines and shutoffs
  • Installation and alignment
  • Leak and flow test
Before and after

See the transformation.

Drag the handle to compare.

After: a bathroom wall with a floating walnut vanity, a quartz top, a round mirror and sconcesBefore: a bathroom wall with a honey oak cabinet, a cultured marble top and a bare light barBeforeAfter
A worn oak vanity, then a floating vanity. From a honey oak cabinet, a cultured marble top and a bare light bar to a floating walnut vanity, a quartz top, a round mirror and sconces.
Why it works

What you get with Faucets and Fixtures

Matching finishes

One consistent look.

Fit checked

Before you buy.

New lines

Supply and shutoffs.

Aligned handles

Neat install.

Finish protected

No scratches.

Tested flow

Hot and cold.

Try it now

Bathroom Remodel Budget Planner

Pick a full remodel, a custom tile shower, a tub conversion, a walk-in tub, an accessible package or a vanity, set the size and add allowances like permits, demolition and plumbing to see a ballpark planning range. Placeholder values only.

How it works

Our process, start to finish.

  1. 01

    Call and share your goals

    You tell us what you want to change, who uses the bathroom and what bothers you now, and we ask about the home and your timing.

  2. 02

    Visit and measure the bathroom

    We look at the room, the plumbing access, the floor and walls, take measurements and photos and talk through ideas on site.

  3. 03

    Review the design and estimate

    You get a plain written estimate with the layout, fixtures, tile, finishes and schedule before anything is ordered.

  4. 04

    Demolish, repair and rough in

    We protect the home, remove the old bathroom, repair the floor and walls and set the plumbing and electrical rough-in.

  5. 05

    Waterproof, tile and install

    Showers are waterproofed and tiled, then the vanity, fixtures, glass, lighting and trim are installed and finished.

  6. 06

    Walk through and care

    We walk the finished bathroom with you, leave a care guide and photos and make it easy to schedule a checkup.

Questions

Faucets and Fixtures FAQ

Which finish is easiest to keep clean?

Brushed finishes hide spots better than polished ones. We show samples.

Can I mix finishes?

Yes with care. We suggest simple rules for combining them.

Do I need a new valve for a new shower trim?

Sometimes. We check the valve brand and style first.

Why does my faucet drip?

Often worn parts. We repair or replace as needed.

Can I buy fixtures myself?

Yes, but we like to check them first so they fit and match.

Next step

Get your Free Estimate for Faucets and Fixtures.

Tell us about your bathroom and your idea and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your bathroom

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate